Pump Plunger Assemblies
Cole-Parmer Edwards C105-14-645 Vacuum Pump Fittings, aluminum adapter, NW 25 by 1/2 to 3/8" hose barb
Adapters fit almost every kind of vacuum pump and accessory. Be sure to order clamps and co-seal or centering ring .
AVANTOR MASTERFLEX (VWR LLC) Masterflex Doppler Ultrasonic Transducer for 1"" and Larger Pipe
Use these doppler flowmeters measure the flow of liquids in pipes from 1/4" and larger. Each flowmeter requires a transducer (32615-66 or -68) and a monitor (32615-60, -62, or -64).|The transducers send flow data via RG59 coax cable to the monitor, and the monitor¿s software automatically adjusts filtering parameters and gain settings to ensure reliable readings are ensured over a wide range of liquid and reflector conditions. Easily configure the monitor using the front panel keypad. A two-line backlit LCD displays rate and accumulated flow values in user selected measuring units. Models 32615-62 and -64 have a 4 to 20 mA input and output for datalogging or recording. A 4 to 20 mA input must be supplied for a 4 to 20 mA output. The monitor is housed in a NEMA 4X (IP-66) enclosure. The NEMA 6 (IP67) rating has the ability to work with temperatures up to 400¿F (200¿C).
BURKLE INC Thread adapter S61x6 DIN61)outer-S96x8(DIN96)inner,nat
This adapter is used when pumps need to be attached to containers such as drums or canisters with different thread standards.It is also suitable for laboratories, where experimental setups often require creative connections, as our adapters provide a secure and adaptable interface.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Cable Assembly for Remote Control, 18-pin Round Connector; 25 ft (7.6 m) Cable Length
Cables include noted terminal connector and cable with stripped wire ends for connection to PLC or other control interface.
HIGH PURITY NEW ENGLAND PUMP SERVICE KIT QUATTROFLOW
Pump Service KIT Quattroflow QF150S diaphragm-valves-O-rings
AVANTOR MASTERFLEX (VWR LLC) Masterflex L/S Tubing Loading Key for Standard Pump Heads
L/S and I/P Standard pump heads include tubing loading keys. A key is required to ensure proper tubing alignment and tension. Order a replacement key based on your pump head series, L/S or I/P.
BURKLE INC Thread adapter 35mm(2-start) inner-G2"inner, black
This adapter is used when pumps need to be attached to containers such as drums or canisters with different thread standards.It is also suitable for laboratories, where experimental setups often require creative connections, as our adapters provide a secure and adaptable interface.